Project Exhibition Organized By Mechanical Engineering Department at SGI 

A Project Exhibition was organized at Samalkha Group of Institutions on 28th November 2014 by B.tech Final year students of Mechanical Engineering stream. On this occasion, Prof. (Dr.) Rajesh Goel (Director, SGI) and Mr. Sunil Kumar (HOD, ME) and Prof. Pardeep Gupta (SLIET Longowal) were present to motivate the students. Prof. Pardeep Gupta was the judge of the competition.
All the Students of Mechanical final year took part in the Project Exhibition and displayed their projects. Each student described the work with the help of charts and power point presentations. Judges with Mechanical Faculty went to each desk and queried about the concept they wished to highlight. During this, the student team who satisfied the guests and visitors were announced as winners.
The project named Magnetic Train won 1st prize by Sonu, Anil, Rajat, Pankaj, Alok,  Unidirectional Motion System won 2nd prize by Ankush, Sandeep, Ajay, Ajeet, Somveer and Regenerative Braking system won 3rd prize by Sachin, Vivek, Vishal, Vinay, Rajeev. The students were awarded with prizes and Certificates. The event was planned for the whole day. The students were found very excited during the event. This event was a source of motivation for the students of 3rd year and 2nd year of B.Tech
Many projects as mentioned below were displayed on this day:-
Vertical Axis Wind Mill Turbine 
Vertical wind turbine and solar panel solution that enable a complete system to be optimized for maximum efficiency and reliability. A wind turbine is a device that converts kinetic energy from the wind to electrical power.
Regenerative Braking System 
It is an effective method of improving vehicle efficiency and already in use in EV. Theoretical investigation of this system shows 25 % saving in fuel consumption. It works on duty cycle and control strategies
Magnetic Train
Magnetic Train works on the principle of magnetic levitation in which with the help of strong electromagnets we can levitate the train. Basically it will work on the principle of magnetic field produced by repulsion and attraction of the poles of the electromagnets
Future Green Car 
Future Green Car is basically a fuel free car which uses solar energy, wind energy and mechanical energy to drive the car. If the project can work efficiently then the pollution can be controlled and a lot of fuel can be saved using this car for using solar energy solar panel is used and for wind energy arrangement is done as well.

Spring Powered Vehicle
This works on the strain energy stored in the spring which is called restoring effect. This was also one of the complete mechanical projects that only uses mechanical systems and works very efficiently.


Four Pistons Sinusoidal Electromagnetic Engine 
This electromagnetic engine works on the sinusoidal arrangement. This piston uses 4 pistons for running of the engine. It uses electromagnetic system and superconductors. This project is innovation in engine technology. A high amount of torque is produced by this engine
90 Degree Steering System
This project deals with the details of four wheel steering (4WS) system. With the help of this system all the four wheels can be turned to any direction using the steering. Thus the vehicle can be controlled more effectively especially during cornering and parking. Also the speed of the vehicle can be increased or decreased.
Unidirectional Motion System 
This project was the totally mechanical working project and focuses on unidirectional motion system. That allows motion in one direction. This system is designed for generating uniform unidirectional motion from non uniform reciprocating motions
Hybrid Chimney 
Solar hybrid chimney is a new method of producing electric power from a solar wind hybrid system it combines three old proven technologies i.e. Chimney effect, Green House effect and wind turbine
Robotic Arm 
This project works on mechanical linkages and sensors to run the robotic arm. The project is new innovation in robots and the robotics helps to minimize human efforts.
Hybrid Car
Hybrid car is basically which uses solar energy, wind energy to drive the car. If the project can work efficiently then the pollution can be controlled for using solar energy solar panel is used and for wind energy arrangement is done as well.
Power Steering
This project describes the use of electrical power steering which tells about the use of small effort for the steering system to control the vehicle. With the use of power steering the work of driver for controlling the vehicle gets lesser.
Electricity Generation with the Help of Exhaust Gases
The use of exhaust gases that are waste during the working of an engine is now being used for very useful works from them electricity generation is one of the major utilization. This will help us solving a lot of energy crisis problem
On this occasion, Mr. Sunil Kumar, H.O.D (ME), and all Faculty members of Mechanical Engineering Department were present.

Project Exhibition Organized By Computer Science & Engineering Department at SGI

A Project Exhibition was organized at Samalkha Group of Institutions on 29th November 2014 by B.tech Final year students of Computer Science & Engineering stream. On this occasion, Dr. (Prof.) Rajesh Goel (Director, SGI) and Mr. Amit Verma (HOD, CSE) and Ms. Bhumika Verma were present to motivate the students.
All the Students of final year took part in the Project Exhibition and displayed their projects. Each student described the work with the help of charts and power point presentations. During this, the student team who satisfied the guests and visitors were announced as winners.
The project named Squid Proxy Server (Linux) made by Karan, Ankur and Ankita, Courier Tracking System (PHP) made by Anurag and Book Treasure (Java) made by Deepti and Pankaj were selected 1st, 2nd and 3rd respectively. The students were awarded with prizes and Certificates. The event was planned for the whole day. The students were found very excited during the event. This event was a source of motivation for the students of 3rd year and 2nd year of B.Tech.
Many projects as mentioned below were displayed on this day:-
Squid Proxy Server (Linux)
The main objective of this project is to develop a proxy server. The purpose of the proxy server is to maintain a cache of commonly accessesed Web sites in order to increase access speed and to reduce bandwidth usage. This project is successfully completed under the supervision of Ms. Garima Garg(AP, CSE) by Karan, Ankita and Ankur students of CSE final year.
Courier Tracking System (PHP)
The objective of this project is providing the client accurate shipment information & minimise the paper work and save manual work. This project is successfully completed under the supervision of Mr. Devender (AP, CSE) by Anurag student of CSE final year.
ATM (Java)
An Automated Teller Machine is a computerized telecommunications device that enables the clients of a financial institution to perform financial transaction without the need for a cashier, human clerk or a bank. This project is successfully completed under the supervision of Mr. Devender Sharma (AP, CSE) by Priyanka, Anita and Prerna students of CSE final year.
Contact Management System (Java)
CMS is a software program that enable user to easily store and find contact information such as name, address, telephone no. etc. This project is successfully completed under the supervision of Mr. Tushar Aggrawal (AP, CSE) by Sapna, Deepakshi and Sahil students of CSE final year.


Online Fashion Store (PHP)
The main goal of this project is to create a shopping website, which allows customers to shop and purchase the products online. This project is successfully completed under the supervision of Ms. Nidhi (AP, CSE) by Jaya students of CSE final year.
Pattern Unclock (Java)
This project is an android based application through which we can change any type of pattern lock of any android phone without users knowledge. This project is successfully completed under the supervision of Mr. Amit Verma (HOD, CSE) by Daksh and Gaurav Rawat students of CSE final year.
Airline Reservation (Java)
The purpose of this project is to prepare a system or application, which could maintain data and provide a user friendly interface for retrieving information about availability of the ticket. This project is successfully completed under the supervision of Mr. Sumit Wadhwa (AP, CSE) by Shubham, Shantanu and Shardha students of CSE final year.
Delhi Tourism (PHP)
By this project the customer can view the information of Delhi and history along with that the number hotels available, different places and visited locations are previewed on the website. This project is successfully completed under the supervision of Mr. Anish (AP, CSE) by Apoorva students of CSE final year.
Enews (.Net)
It is a web based news dissemination platform. Using it any person can upload news of current events by creating a reporter account. This project is successfully completed under the supervision of Mr. Anish (AP, CSE) by Manish and Ashish Tyagi students of CSE final year.
On this occasion, Mr. Amit Verma, (HOD, CSE) and all Faculty members of CSE Department were present.

Project Exhibition of ECE Department at SGI

On 28^th November 2014, ECE Department of Samalkha Group of Institutions organized a one day project exhibition in their campus for B.Tech ECE final year students.

 On this occasion, Prof. (Dr.) Rajesh Goel, Director, SGI and experts were present to motivate & examine the student’s projects. Around 58 students took part in the exhibition and displayed their projects. Each student had to describe their work with the help of charts and handouts. The students were found very excited during the event. This event was a source of motivation regarding their technical knowledge, confidence and communication skills with the aim of helping to face various phases of placement activities

This project exhibition was judged by; Er. Arvind Kumar, Senior faculty at NIT Kurukshetra. Director SGI and Mr. Vikas Uttaraja HOD ECE & EEE Department were also present and they highly appreciated the quality of projects.

Many projects as mentioned below were displayed on that day:

Three Axis Accelerometer:

This project deals with the gravity sensor using accelerometer  and RF module for controlling DC motors. The guide of the project was Mr.Pankaj Kakkar (AP, ECE Deptt.)

Rf Helmet:

In this project, there were two RF modules used as transmitter & receiver which works only when someone wears the helmet and then the vehicle starts. Project Guided by Ms. Diksha Nagpal (AP, ECE Deptt.).

Advance Border Security & Defence System:

This project deals with sensing the human movement at border and an alarm rings if it is found. The guide of the project was Mr.Hemant Chugh (AP, ECE Deptt.).

Automatic Gate Control:

In this project, there is a sensor at the gate which senses the presence of human and the gate opens itself. The guide of the project was Mr. Shakti Sindhu (AP, ECE Deptt.).

Visitor Counter Using Led Matrix Display:

This project deals with counting the number of persons entering the room and leaving the room. The guide of the project was Mr.Hemant Chugh (AP, ECE Deptt.).

As evaluated by the experts; the 1^st prize was won by team of Robo Using 3-Axis Accelerometer by Prashant, Vipul, Anubhav, Joseph, Saddam, the 2^nd prize by RF Helmet by Bharat, Priyanshu, Varun, Rahul, Dipanshu, Shashank and 3^rd prize by  Advance Border Security & Defence System by Ayush, Amit, Devanshu, Ankush, Prateek, Harmeet. In the concluding remarks; Er. Arvind Kumar, Asisstant Professor appreciated the efforts of the ECE department to organise such exhibition and desired that this type of activity must be held in every semester by ECE department and further efforts must be made to improve the quality of the projects so that the students get the opportunity to exhibit their innovative and creative ideas to further strengthen their practical based activities.

Project Exhibition of EEE Department at SGI

On 28^th November 2014, EEE Department of Samalkha Group of Institutions organized a one day project exhibition in their campus for B.Tech EEE final year students.

On this occasion, Prof. (Dr.) Rajesh Goel, Director, SGI and experts were present to motivate & examine the student’s projects. Around 22 students took part in the exhibition and displayed their projects. Each student had to describe their work with the help of charts and handouts. The students were found very excited during the event. This event was a source of motivation regarding their technical knowledge, confidence and communication skills with the aim of helping to face various phases of placement activities

This project exhibition was judged by; Mr. Sandeep Ghoyat, A.P. NCCE, Israna, Dr. Rajesh Goel, Director SGI and Mr. Vikas Uttaraja HOD ECE & EEE Department were also present and they highly appreciated the quality of projects.

Many projects as mentioned below were displayed on that day:

Tea/Coffee Maker Machine (Xpresso Machine):

This project deals with an xpresso machine which has two inlets & outlets with four selectors for tea & coffee. The Project was guided by Mr. Sagar Bhosle (AP, EEE Deptt.).

Dc Motor Controller:

In this project speed of DC motor is controlled by PWM Techniue using mobile phone’s frequency. The Project Guided by Ms. Vini Gupta (AP, EEE Deptt.).

Smart Parking System:

This project deals with a smart card , the person who  is have registerd only for him the gate will open for parking. The guide of the project was Ms. Dimpy (AP, EEE Deptt.).

Overvoltage & Undervoltage Alarm System:

In this project there is a sensor which after a particular limit of voltage gives the alarm. The guide of the project was Ms. Dimpy (AP, EEE Deptt.).

Auto Room Heater Temperature Control:

This project deals with THE CONTROL OF temperature of a room heater using sensor. The guide of the project was Mr. Sagar Bhosle (AP, EEE Deptt.).

As evaluated by the experts; the 1^st prize was won by team of Xpresso Machine by Arpit, Sarbjeet, Antram, Amit, 2^nd prize was won by team of  DC Motor Controller by Rajesh, Hardeep, Krishan, Sahil and 3^rd prize was won by team of  Smart Parking System by Pooja, Devender, Sudhir, Holiho, Supriya. In the concluding remarks; Mr. Arvind Kumar, Asisstant Professor, NIT Kurukshetra & Mr. Sandeep Ghoyat, A.P. NCCE , Israna, appreciated the efforts of the EEE department to organize such exhibition and desired that this type of activity must be held in every semester by EEE department and further efforts must be made to improve the quality of the projects so that the students get the opportunity to exhibit their innovative and creative ideas to further strengthen their practical based activities.

Project Exhibition Organized By Civil Engineering Department at SGI

A Project Exhibition was organized at Samalkha Group of Institutions on 29^th November 2014 by B.tech Final year students of Civil Engineering stream. On this occasion, Dr. (Prof.) Rajesh Goel (Director, SGI) and Mr. Gaurav Kumar, Mr. Shashank and Mr. Satyam were present to motivate the students.

All the Students of Civil Engineeering final year took part in the Project Exhibition and displayed their projects. Each student described the work with the help of Models and power point presentations. Judges with Mechanical Faculty along with went to each desk and queried about the concept they wished to highlight. During this, the student team who satisfied the guests and visitors were announced as winners.

The project named Failure of Foundation during earth quack, Highway plan of panipat after 20 years and Accident safety on NHI were selected 1^st, 2^nd and 3^rd respectively. Mainsh, Amit, Ashish were declared as 1^st, Sumit, Rajput, Vishal, Ankit were Declared as 2^nd Nishant,Vikas, Akash were declared as 3^rd.These students were awarded with prizes and Certificates. The event was planned for the whole day. The students were found very excited during the event. This event was a source of motivation for the students of 3^rd year and 2^nd year of B.Tech

Many projects as mentioned below were displayed on this day:-

Failure of foundation during Earth quake

During this project students collaborated and formed teams and worked various aspects of the project such as some of the students made Designs from which model was prepared others was collecting the data of the various sites of North Delhi region. And some students were doing survey of that region all the teams worked together and formed a successful project.

Highway Plan of Panipat after 20 Years

During this project students collaborated and formed teams and worked various aspects of the project such as some of the students. First of all the decided about what is the need of a new plan of highway as one is already present. The already present one in not a successful one it has many faults and a correction on was displayed as a model.

Accident safety at NHI Samalkha

In this project student collected the Data from the various Police station of the accidents which have occurred at NHI in Samalkha region and found out the various causes for them and successfully presented the measures to control them.

Workshop on Current Technology Requirement in IT Industry at SGI

A workshop on Current Technology Requirement in IT Industry was conducted by CSE Department of Samalkha Group of Institutions (SGI) on 19^th November 2014 for CSE students. The workshop focused on Career Development & making students technically sound. The event was chaired by Mr. Amit Verma (HOD CSE); Mr. Amit Sinha (Placement Manager); Mr. Devender Sharma (AP, CSE); Mr. Tushar (AP, CSE) and other faculty members.  

The eminent Personality who guided the students was Mr. Anurag Dubey (HR Manager) having 10+ years of experience and worked in companies like LG, Adept solutions etc.

It was an open discussion with students regarding technology requirement, scope of technology, technology specific training and future perspective, growth in various fields of IT Industry.  He told about Professional career services such as Resume Development; Mock Interviews; Communication Skills; Personality Development; Professional Networking etc. He also discussed about recruitment process. The purpose of the process is to make aware and encourage about requirement of technology in current industry.

He also gave some tips on “Resume Building” on its structuring and organization. Five points that Interviewer must kept in their mind is Dressing Sense, good timing, Body language, queries.

All the students actively participated in FAQ session. All the faculty members of CSE Department played an important role in organizing and coordinating the event. The event was coordinated by Mr. Devender Sharma (AP, CSE) under the guidance of Mr. Amit Verma (HOD, CSE).